<address id="pd5d5"><address id="pd5d5"><nobr id="pd5d5"></nobr></address></address>

    <ruby id="pd5d5"></ruby><span id="pd5d5"><pre id="pd5d5"></pre></span>
    <address id="pd5d5"></address>

      How to use a CNC bending machine?

      CREATE_TIME:2018-11-30 VIEWS:1832
        CNC bending machine mold including bracket, work table and clamping plate, the use of wire on the coil power, power on the pressure plate produced by gravity, so as to achieve the clamping between the pressure plate and the base plate.Operation method:
        1. Switch on the power and switch on the control panel before starting the oil pump.(at this time, the machine does not move)
        2, stroke regulation, use must pay attention to the regulation of stroke, must be tested before bending.
        3, bending groove selection, according to the actual situation of choice.For example: for bending 4mm sheet metal, the slot of about 32 should be selected.
        4, after the block adjustment is generally electric quick adjustment and manual fine-tuning.
        5, step on the foot switch began to bend, loosen the foot will stop, continue to step down.

      Related articles

        <address id="pd5d5"><address id="pd5d5"><nobr id="pd5d5"></nobr></address></address>

        <ruby id="pd5d5"></ruby><span id="pd5d5"><pre id="pd5d5"></pre></span>
        <address id="pd5d5"></address>
          成 人 色综合_影音先锋最稳定资源_狠狠狠的在啪线香蕉人_亚洲欧美中文字幕先锋,亚洲区小说区综合图片,另类小说视频一区,男人和女人特黄的视频